In 1977 a small custom sheet metal shop, known as Spring Branch Sheet Metal (SBSM) opened its doors with seven employees. After years of producing sheet metal products ranging from roof gutters to kitchen hoods, SBSM found a niche in the market of HVAC accessories. In 1983, the name Curbco was trademarked and the evolution began from local sheet metal shop to a nationally recognized supplier throughout the HVAC industry.
Question: I need to install a unit onto a sloped roof, can you help?
Answer: Yes, this is a common request. First go to Welded RTU Curbs. If your customer needs help calculating the pitch go to How to Calculate the Pitch of a Roof or just email sales@curbco.com we will take care of you.
Question: My specs require a curb that is 18″ tall, can you help?
Answer: Yes, we can provide you with a fully welded 18″ tall curb, we will need the specs and or the model number of the unit and whether you need it insulated or not.
Question: I sometimes need to install a unit onto a metal roof, can you help?
Answer: Yes! If it is new construction we will need the specs of the roof, if you are adding a unit to an existing metal roof we will need the profile of the roof with dimensions and angles.
Question: I need to replace a side discharge unit with a downflow unit, can you help?
Answer: Yes, this is something we do often, but will need the specs and it will be a new custom design.
Question: I need duct work, drain pans and a filter housing, can you help?
Answer: Unfortunately No, we have chosen to specialize in the new/replacement rooftop unit market.
Question: How are you able to manufacture a custom curb adapter in 2-3 days?
Answer: There are several reasons but two that come to mind are.
1. We have an extensive 20+ year database of pre-designed units.
2. We run two shifts 12 months per year to maximize production capabilities.
We are dedicated to a quick turnaround, because replacing a unit FAST can be the difference maker in your customer getting the job or not.
Copyright © 2012 Curbco. All rights reserved